These safety issues must go to attention when injection molds

Release time:

2024-12-17

Plastic molds are very important for injection molding production

These safety issues must go to attention when injection molds

Plastic molds are very important for injection molding production, in order to ensure the safety of the molds and staff, it is necessary to do a good job in advance to deal with the policy and prevention. For the rigidity, strength, processability and quality of the mold, the general requirements of the mold can continuously produce one thousand products, and will not appear serious quality and defects problems.

Moulds should be equipped with working and storage limiters, automation line mold single layer storage using nitrogen cylinders, double or triple layer using rigid storage limiters. Nitrogen cylinders mainly play a cushioning role, and to ensure that the internal parts of the mold is not affected by the stress, to avoid the mold bruises or even accidents.

In order to facilitate the replacement of damaged parts inside the mold, it is necessary to set up a safety platform, the safety platform should be square and the size of 150 mm or more.

Upper mold moving parts to do safety measures, the lower part of the mold should have a protective plate, protective cover, mold parts should also take into account the screws loose, to prevent chipping, falling off, can not stand the impact, oxidation and other issues.

In order to save time and facilitate the transportation of the mold, the upper and lower molds need to be set up to connect the plate, in order to ensure the safety of the mold according to the characteristics of the press machine reasonable arrangement of the mold, so that the mold is more convenient to install and operate.

Injection mold can be divided into parting surface

2024-12-17

These safety issues must go to attention when injection molds

Plastic molds are very important for injection molding production

2024-12-17

Do you know the characteristics of mold processing?

Mold processing industry is developing rapidly

2024-12-17

Plastic mold heat treatment problems

Severe reticulated carbide segregation exists in the mold material.

2024-12-17

Mold industry development trend analysis