Injection molds among these elements you know a few

Release time:

2024-12-17

Injection mold can be divided into parting surface

Injection molds among these elements you know a few

Injection mold can be divided into parting surface, structural parts, mold precision, mold accuracy, mold precision, pouring system, plastic shrinkage and factors affecting the dimensional accuracy of the product, take a look below!

1. Parting surface: that is, the contact surface between the injection mold and the convex mold when the mold is closed. Its location and form of choice by the product shape and appearance, wall thickness, forming methods, post-treatment process, mold type and structure, demolding methods and forming machine structure and other factors.

2. Structural parts: i.e. slider, slanting top and straight top of complex molds. The design of structural parts is very critical, which is related to product life, processing cycle, cost, product quality and so on. Therefore, the design of complex mold core structure requires the comprehensive ability of designers, and try our best to pursue a simpler, more durable, more economical design solutions.

3. Mold precision: i.e. avoiding card, positioning, guide pillar, positioning pin, etc.. The positioning system is related to the appearance quality of the product, mold quality and mold life. According to the different structure of the mold, choose different positioning methods. The control of positioning accuracy mainly depends on the processing. The positioning of the inner mold is mainly considered by the designer to design a more reasonable and easy-to-adjust positioning method.

4. Gating system: that is, the feeding channel of the injection molding machine from the nozzle to the cavity, including the main sprue, branch sprue, gate and cold cavity. In particular, the location of the gate should be conducive to the choice of a good flow state with molten plastic to fill the cavity, and in the open mold (except hot runner molds), attached to the product on the solid runner and gate cold material can be easily ejected from the mold and removed.

5. Plastic shrinkage and factors affecting the dimensional accuracy of the product: such as injection mold manufacturing and assembly errors, mold wear and tear. In addition, when designing compression molds and injection molds, the matching of molding machine process parameters and structural parameters should also be considered.

Injection mold can be divided into parting surface

2024-12-17

These safety issues must go to attention when injection molds

Plastic molds are very important for injection molding production

2024-12-17

Do you know the characteristics of mold processing?

Mold processing industry is developing rapidly

2024-12-17

Plastic mold heat treatment problems

Severe reticulated carbide segregation exists in the mold material.

2024-12-17

Mold industry development trend analysis